Trigger and stop an AlertUpdated 15 hours ago
Trigger an Alert from your Clip or Halo when you need help. Your Safety Circle is notified right away with your location, and the Alert stays active until you mark yourself safe in the app or it ends automatically after 24 hours.
Before you begin
Set up Alert. On Clip, turn on Alert in its Alert settings. Alert is always on for Halo.
Make sure at least one Safety Circle member is Active. With Alert Dispatch, a Safety Circle is optional because the dispatch center checks on you.
Keep Bluetooth, Location, and Notifications turned on for the Pebblebee app.
Keep the Pebblebee app installed and signed in on your phone.
Important: Alert needs an internet connection on your phone. Without one, your Safety Circle cannot be notified.
Trigger an Alert
Clip 4 and Clip 5
Rapidly press the button 8 or more times.
Your Clip responds based on its Alert mode: it sounds a siren and flashes its lights, or it stays silent.
Halo
Siren and strobe: Pull Halo apart to remove the magnetic cap.
Silent Alert: Rapidly press the side button 8 or more times.
What happens next
The Pebblebee app opens the Alert screen.
Your Active Safety Circle members receive a text message with a link to your location.
Your location is shared once, or continuously if you use live location sharing.
If you use Alert Dispatch with Emergency Call turned on, a dispatch agent texts you and then calls you.
What your Safety Circle sees during an Alert
What happens when you trigger an Alert with Alert Dispatch
Stop the siren and lights on your device
Clip: Press and hold the button for 2 seconds, or rapidly press it again.
Halo: Reattach the magnetic cap, rapidly press the side button again, or press and hold the side button for 2 seconds.
Stopping your device turns off its siren and lights only. Your Alert stays active in the app, and your Safety Circle can still see it, until you mark yourself safe.
Mark yourself safe in the app
On the Alert screen, select I’M SAFE.
Confirm it is you with Face ID, Touch ID, your phone passcode, or your Safe PIN, if prompted.
Select I’M SAFE to end the Alert.
Choose SEND SAFE STATUS to let your Safety Circle know you are okay, or SKIP.
Select DONE.
Your Alert has ended. If you use Alert Dispatch, ending the Alert also cancels the emergency response.
Important: With Alert Dispatch, stopping your device does not end the Alert or cancel the emergency response. Mark yourself safe in the app.
End an Alert and cancel an emergency response
If your Alert does not start
Press the button 8 or more times quickly, without pausing.
On Clip, confirm that Alert is turned on in its Alert settings.
Make sure your phone has an internet connection and Bluetooth is turned on.
Confirm that the Pebblebee app has Location and Notifications permissions.
Update your device firmware and the Pebblebee app.