Help Center- Pebblebee (English) logo
Help Center- Pebblebee (English) logo

All articles

Set up Alert in the Pebblebee appUpdated 15 hours ago

Set up Alert once to use it with every supported device on your account. Setup verifies your profile, adds your first Safety Circle member, and turns on Alert for your Clip. Alert is always on for Halo.

Before you begin

  • Add your Clip 4, Clip 5, or Halo to the Pebblebee app.

  • Install the latest version of the Pebblebee app.

  • Keep your device close to your phone.

  • Make sure your phone has an internet connection.

Verify your profile and add your Safety Circle

The first time you open Alert, the Pebblebee app guides you through setup.

  1. Open the Pebblebee app.

  2. Select your Clip or Halo from your item list.

  3. Under Features, select Manage next to Alert.

  4. Follow the introduction screens.

  5. Enter your name and your phone number, including your country code.

  6. Enter the verification code sent to your phone by text message.

  7. Add your first Safety Circle member. They receive an invitation by text message.

  8. Review the Alert plans and continue with your current plan or choose a new one.

  9. Allow the permissions the app requests.

Important: Your Safety Circle members only receive your Alerts after they accept your invitation. Ask them to accept it as soon as they receive it.

Turn on Alert for your Clip

  1. Select your Clip from your item list.

  2. Under Features, select Manage next to Alert.

  3. Under Alert Mode, select Siren + Strobe or Silent Mode.

  4. When prompted, press the button on your device five times.

  5. Listen for the confirmation sound.

Alert is now turned on for this Clip. Repeat these steps for each Clip you want to use with Alert.

Halo does not need this step. Alert is turned on by default on Halo and cannot be turned off.

Confirm that Alert is ready

  • Your profile shows your verified phone number.

  • At least one Safety Circle member shows as Active.

  • Your Clip’s Alert settings show Siren + Strobe or Silent Mode.

To see how an Alert works without notifying anyone, see Test your Alert.

If Alert does not turn on for your Clip

  • Confirm that your device is charged and close to your phone.

  • Press the button firmly five times at a steady pace when prompted.

  • Make sure Bluetooth is turned on.

  • Update your device firmware if the app shows an available update.

  • Close and reopen the Pebblebee app, then try again.

If you receive a Too many attempts message while verifying your phone number, wait one minute before requesting a new code.

Was this article helpful?