Choose your Alert mode and location sharingUpdated 15 hours ago
Your Alert settings control how your device responds when you trigger an Alert and how your location is shared with your Safety Circle.
Before you begin
Set up Alert in the Pebblebee app.
Keep your device close to your phone. Some changes must be confirmed on the device.
Choose your Alert mode on Clip
Open the Pebblebee app.
Select your Clip from your item list.
Under Features, select Manage next to Alert.
Under Alert Mode, choose an option:
Siren + Strobe: Your Clip sounds a loud siren and flashes its lights.
Silent Mode: Your Clip stays quiet. Your Safety Circle is still notified.
Off: Alert is turned off for this Clip.
When prompted, press the button on your Clip five times.
Your changes are saved automatically. Alert mode is set for each Clip. Both modes are triggered the same way: rapidly press the button 8 or more times. Silent Mode is available on every Alert plan.
Warning: The siren is very loud. Test it in a suitable place and protect your hearing.
Alert on Halo
Halo has no Alert mode setting. Alert is turned on by default on Halo and cannot be turned off. How you trigger it decides how it responds:
Siren and strobe: Pull Halo apart.
Silent Alert: Rapidly press the side button 8 or more times.
Choose how your location is shared
Open your device’s Alert settings.
Under Location Sharing, select Static or Live.
Static: Your Safety Circle receives your location once, at the moment you trigger the Alert. Available on every plan.
Live: Your location updates every 5 seconds during the Alert, for up to 24 hours. Available with Alert Live and Alert Dispatch.
Location sharing only starts when you trigger an Alert. It applies to every Alert-enabled device on your account.
If you select Live on Alert Lite, the app offers to upgrade your plan.
How live location sharing uses your battery
Live location sharing uses your phone’s GPS and mobile data, so it uses more battery than static sharing.
If your phone’s battery drops below 20% during an Alert, live sharing might switch to static sharing to save power. If your battery is already below 20% when you trigger an Alert, your location might be shared once.
Your location comes from your phone, not from your Pebblebee device. Alert does not turn your device into a GPS tracker.
Protect how your Alert is stopped
Under Access & Verification, you can require proof that it is you before an Alert ends:
Biometric Authentication: Use Face ID, Touch ID, or your phone passcode.
Safe PIN: Use a 4-digit PIN.
These options are optional with Alert Lite and Alert Live. With Alert Dispatch, a Safe PIN is required.